Case-IH CS-68 (A) vs Massey Ferguson MF 375 (A)

8 material differences · fewer than 12

Tractor one

1994–2004

No measured PTO figure

Tractor two

1987–1997

No measured PTO figure

Which should you choose?

Read our verdict on the CS-68 (A) and the MF 375 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH CS-68 (A) and Massey Ferguson MF 375 (A), field by field
Field	CS-68 (A)	MF 375 (A)	Gap
Engine
Engine power, claimed claimed	67 hp	67.1 hp	—
Engine declared	MWM 301.89 T	Perkins A 4.236	differs
Displacement declared	—	3.87 L	—
Maximum torque declared	—	173 lb·ft · 234 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry double clutch	—	—
Hydraulics & hitch
Pump flow declared	10.9 gpm · 41.4 L/min	16.7 gpm · 63.3 L/min	+53% MF 375 (A)
Pressure declared	—	2,466 psi · 170 bar	—
Three-point lift at ends declared	3,968 lb · 1,800 kg	6,746 lb · 3,060 kg	+70% MF 375 (A)
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	6,217 lb · 2,820 kg	6,945 lb · 3,150 kg	+12% MF 375 (A)
Maximum permissible mass declared	—	13,669 lb · 6,200 kg	—
Wheelbase declared	87.0 in · 2,209 mm	89.8 in · 2,280 mm	—
Length declared	145.7 in · 3,700 mm	153.1 in · 3,888 mm	—
Width declared	74.8 in · 1,900 mm	78.0 in · 1,980 mm	—
Height declared	92.3 in · 2,345 mm	104.1 in · 2,645 mm	+13% MF 375 (A)
Ground clearance declared	15.7 in · 400 mm	12.2 in · 311 mm	+29% CS-68 (A)
Fuel tank declared	87.7 qt · 83.0 L	114.1 qt · 108 L	+30% MF 375 (A)

Source

Source