Case-IH CS-68 (A) vs Deutz-Fahr Agroplus 67
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the CS-68 (A) and the Agroplus 67 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | CS-68 (A) | Agroplus 67 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 67 hp | 66.1 hp | — |
| Engine declared | MWM 301.89 T | SLH 1.000.3 WT | differs |
| Displacement declared | — | 3.00 L | — |
| Maximum torque declared | — | 192 lb·ft · 260 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Dry double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 10.9 gpm · 41.4 L/min | 14.3 gpm · 54.0 L/min | +30% Agroplus 67 |
| Three-point lift at ends declared | 3,968 lb · 1,800 kg | 6,614 lb · 3,000 kg | +67% Agroplus 67 |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,217 lb · 2,820 kg | 5,732 lb · 2,600 kg | +8% CS-68 (A) |
| Maximum permissible mass declared | — | 9,921 lb · 4,500 kg | — |
| Wheelbase declared | 87.0 in · 2,209 mm | 82.9 in · 2,105 mm | — |
| Length declared | 145.7 in · 3,700 mm | 135.0 in · 3,430 mm | +8% CS-68 (A) |
| Width declared | 74.8 in · 1,900 mm | 82.7 in · 2,100 mm | +11% Agroplus 67 |
| Height declared | 92.3 in · 2,345 mm | — | — |
| Ground clearance declared | 15.7 in · 400 mm | 16.7 in · 425 mm | +6% Agroplus 67 |
| Fuel tank declared | 87.7 qt · 83.0 L | 95.1 qt · 90 L | +8% Agroplus 67 |
Case-IH CS-68 (A) sources
Source
- Source: Traktorenlexikon, “Case-IH CS68/a”
- Source: Traktorenlexikon, “Steyr M 968”
Deutz-Fahr Agroplus 67 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 67”