Case-IH CS-68 (A) vs Case-Steyr M 968 (a)
1 material differences · fewer than 12
Which should you choose?
Read our verdict on the CS-68 (A) and the M 968 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
1 material differences · 13 fields identical or within 5%, which is not counted as material
| Field | CS-68 (A) | M 968 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 67 hp | 67 hp | — |
| Engine declared | MWM 301.89 T | MWM 301.89 T | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Dry double clutch | Dry double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 10.9 gpm · 41.4 L/min | 10.9 gpm · 41.4 L/min | — |
| Three-point lift at ends declared | 3,968 lb · 1,800 kg | 5,754 lb · 2,610 kg | +45% M 968 (a) |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,217 lb · 2,820 kg | 6,217 lb · 2,820 kg | — |
| Maximum permissible mass declared | — | 9,259 lb · 4,200 kg | — |
| Wheelbase declared | 87.0 in · 2,209 mm | 87.0 in · 2,209 mm | — |
| Length declared | 145.7 in · 3,700 mm | 145.7 in · 3,700 mm | — |
| Width declared | 74.8 in · 1,900 mm | 74.8 in · 1,900 mm | — |
| Height declared | 92.3 in · 2,345 mm | 92.3 in · 2,345 mm | — |
| Ground clearance declared | 15.7 in · 400 mm | 15.7 in · 400 mm | — |
| Fuel tank declared | 87.7 qt · 83.0 L | 87.7 qt · 83.0 L | — |
Case-IH CS-68 (A) sources
Source
- Source: Traktorenlexikon, “Case-IH CS68/a”
- Source: Traktorenlexikon, “Steyr M 968”
Case-Steyr M 968 (a) sources
Source
- Source: Traktorenlexikon, “Steyr M 968”