Case-IH C 70 vs Hürlimann XN-707

14 material differences

Tractor one

1992–1997

No measured PTO figure

Tractor two

1998–2003

No measured PTO figure

Which should you choose?

Read our verdict on the C 70 and the XN-707 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH C 70 and Hürlimann XN-707, field by field
Field	C 70	XN-707	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	Steyr WD 301.87	Hürlimann 1000.3 WT-1	differs
Displacement declared	3.12 L	3.00 L	—
Maximum torque declared	198 lb·ft · 268 N·m	184 lb·ft · 250 N·m	+7% C 70
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Dry Fichtel & Sachs double clutch	Pedal-operated dry SDF single-disc clutch as driving clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	11.5 gpm · 43.5 L/min	6.6 gpm · 25.0 L/min	+74% C 70
Pressure declared	3,481 psi · 240 bar	3,046 psi · 210 bar	+14% C 70
Three-point lift at ends declared	5,181 lb · 2,350 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,746 lb · 3,060 kg	5,412 lb · 2,455 kg	+25% C 70
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	87.8 in · 2,229 mm	75.8 in · 1,926 mm	+16% C 70
Length declared	149.8 in · 3,805 mm	135.1 in · 3,431 mm	+11% C 70
Width declared	76.6 in · 1,945 mm	50.8 in · 1,290 mm	+51% C 70
Height declared	95.5 in · 2,425 mm	83.1 in · 2,110 mm	+15% C 70
Ground clearance declared	15.4 in · 390 mm	9.1 in · 230 mm	+70% C 70
Turning radius, braked declared	—	13.4 ft · 4.07 m	—
Fuel tank declared	66.6 qt · 63.0 L	61.3 qt · 58.0 L	+9% C 70

Source

Source