Case-IH 7230 Magnum or Fendt Favorit 822 LSE?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 7230 Magnum has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Favorit 822 LSE has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 7230 Magnum | Favorit 822 LSE | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 152.2 kW (204.1 hp)Traktorenlexikon, “Case-IH 7230” | 154 kW (207 hp)Traktorenlexikon, “Fendt Favorit 822” | Not comparableNot comparable on power at the PTO shaft: the 7230 Magnum has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Favorit 822 LSE has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 7230 Magnum and the Favorit 822 LSE. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 7230 Magnum and the Favorit 822 LSE. |
| Which pumps more oil for implements? | 110.9 L/min (29.3 gpm)Traktorenlexikon, “Case-IH 7230” | 104.4 L/min (27.6 gpm)Traktorenlexikon, “Fendt Favorit 822” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | — | 9,180 kg (20,238 lb)Traktorenlexikon, “Fendt Favorit 822” | No figureNo call on three-point lift: no figure on record for the 7230 Magnum. |
| Which is heavier, for traction? | 8,069 kg (17,789 lb)Traktorenlexikon, “Case-IH 7230” | 7,690 kg (16,954 lb)Traktorenlexikon, “Fendt Favorit 822” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 11,575 kg (25,519 lb)Traktorenlexikon, “Case-IH 7230” | 12,000 kg (26,455 lb)Traktorenlexikon, “Fendt Favorit 822” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 24Traktorenlexikon, “Case-IH 7230” | 44Traktorenlexikon, “Fendt Favorit 822” | AheadThe Fendt Favorit 822 LSE has 83% more forward gears (20 gears) than the Case-IH 7230 Magnum (both forward gears, as stated by the source). |
| Which offers a creeper range? | YesTraktorenlexikon, “Case-IH 7230” | YesTraktorenlexikon, “Fendt Favorit 822” | EvenEven on a creeper range: every machine offers one. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Case-IH 7230” | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Fendt Favorit 822” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Case-IH 7230” | 750 rpm / 1000 rpmTraktorenlexikon, “Fendt Favorit 822” | DifferPTO speeds differ: the Case-IH 7230 Magnum 540/1000 rpm and the Fendt Favorit 822 LSE 750/1000 rpm — each offers a speed the other does not; which matters depends on the implement. |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the 7230 Magnum and the Favorit 822 LSE. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Case-IH 7230” | 4WDTraktorenlexikon, “Fendt Favorit 822” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1994–1997 | 1993–2004 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Fendt Favorit 822 LSE has 83% more forward gears (20 gears) than the Case-IH 7230 Magnum (both forward gears, as stated by the source).
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on a creeper range: every machine offers one.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- PTO speeds differ: the Case-IH 7230 Magnum 540/1000 rpm and the Fendt Favorit 822 LSE 750/1000 rpm — each offers a speed the other does not; which matters depends on the implement.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 7230 Magnum has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Favorit 822 LSE has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift and PTO independence.
← Every figure for both machines, side by side, with sources