Agco GT-75 vs Renault Ceres 95 (A)

10 material differences · fewer than 12

Tractor one

2004–2007

No measured PTO figure

Tractor two

1992–1995

No measured PTO figure

Which should you choose?

Read our verdict on the GT-75 and the Ceres 95 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Agco GT-75 and Renault Ceres 95 (A), field by field
Field	GT-75	Ceres 95 (A)	Gap
Engine
Engine power, claimed claimed	82 hp	81.9 hp	—
Engine declared	SAME-DEUTZ-FAHR 1000.4 AT 5	MWM D 226-4	differs
Displacement declared	4.00 L	4.15 L	—
Maximum torque declared	237 lb·ft · 321 N·m	204 lb·ft · 276 N·m	+16% GT-75
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	11.7 gpm · 44.3 L/min	12.0 gpm · 45.3 L/min	—
Pressure declared	3,118 psi · 215 bar	—	—
Three-point lift at ends declared	—	10,075 lb · 4,570 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,038 lb · 2,739 kg	7,341 lb · 3,330 kg	+22% Ceres 95 (A)
Maximum permissible mass declared	—	13,228 lb · 6,000 kg	—
Wheelbase declared	88.0 in · 2,235 mm	95.7 in · 2,430 mm	+9% Ceres 95 (A)
Length declared	151.6 in · 3,851 mm	152.4 in · 3,870 mm	—
Width declared	76.7 in · 1,948 mm	73.2 in · 1,860 mm	—
Height declared	106.0 in · 2,692 mm	100.4 in · 2,550 mm	+6% GT-75
Ground clearance declared	17.5 in · 445 mm	19.3 in · 490 mm	+10% Ceres 95 (A)
Turning radius, braked declared	—	12.5 ft · 3.80 m	—
Fuel tank declared	94.8 qt · 89.7 L	155.3 qt · 147.0 L	+64% Ceres 95 (A)

Source

Source