Agco DT-225 B vs Massey Ferguson MF 8180 A

9 material differences · fewer than 12

Tractor one

2009–2010

No measured PTO figure

Tractor two

1998–1999

No measured PTO figure

Which should you choose?

Read our verdict on the DT-225 B and the MF 8180 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Agco DT-225 B and Massey Ferguson MF 8180 A, field by field
Field	DT-225 B	MF 8180 A	Gap
Engine
Engine power, claimed claimed	261.4 hp	256.7 hp	—
Engine declared	SISU-DIESEL 84 CTA-4V	VALMET 645 TCC	differs
Displacement declared	8.42 L	8.42 L	—
Maximum torque declared	—	801 lb·ft · 1,086 N·m	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	pedal-operated hydraulic multi-plate clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	27.9 gpm · 105.5 L/min	—	—
Pressure declared	3,336 psi · 230 bar	3,205 psi · 221 bar	—
Three-point lift at ends declared	24,595 lb · 11,156 kg	22,487 lb · 10,200 kg	+9% DT-225 B
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	25,838 lb · 11,720 kg	21,539 lb · 9,770 kg	+20% DT-225 B
Maximum permissible mass declared	—	30,865 lb · 14,000 kg	—
Wheelbase declared	122.2 in · 3,105 mm	121.1 in · 3,075 mm	—
Length declared	215.7 in · 5,479 mm	207.0 in · 5,257 mm	—
Width declared	79.3 in · 2,014 mm	99.1 in · 2,518 mm	+25% MF 8180 A
Height declared	141.0 in · 3,581 mm	123.4 in · 3,135 mm	+14% DT-225 B
Ground clearance declared	18.5 in · 470 mm	20.1 in · 510 mm	+9% MF 8180 A
Turning radius, braked declared	24.3 ft · 7.40 m	—	—
Fuel tank declared	623.4 qt · 590.0 L	433.2 qt · 410.0 L	+44% DT-225 B

Source

Source