AGCO-ALLIS 6680 vs URSUS 934

7 material differences · fewer than 12

Tractor one

AGCO-ALLIS 6680

1991–1997

No measured PTO figure

Tractor two

URSUS 934

1991–2003

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (56%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

7 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 6680 and URSUS 934, field by field
Field6680934Gap
Engine
Engine power, claimed claimed78.9 hp78.9 hp
Engine declaredS.L.H. 1000.4 A-1ZTS Martin Z 8.401differs
Displacement declared4.00 L4.56 L+14% 934
Maximum torque declared193 lb·ft · 261 N·m205 lb·ft · 278 N·m+7% 934
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h18.6–24.9 mph · 30–40 km/h
Clutch declaredSingle plate dry clutch
Hydraulics & hitch
Hydraulic centre declaredOpen centre
Hydraulic control declaredConstant flow
Pump flow declared10.7 gpm · 40.5 L/min11.9 gpm · 45.2 L/min+12% 934
Three-point lift at ends declared6,790 lb · 3,080 kg
Rear PTO speeds declared540/1000/540E/1000E rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared6,724 lb · 3,050 kg10,494 lb · 4,760 kg+56% 934
Maximum permissible mass declared11,464 lb · 5,200 kg
Wheelbase declared96.4 in · 2,449 mm94.4 in · 2,398 mm
Length declared161.2 in · 4,094 mm162.5 in · 4,128 mm
Width declared82.4 in · 2,093 mm81.7 in · 2,076 mm
Height declared111.2 in · 2,824 mm115.4 in · 2,930 mm
Ground clearance declared17.3 in · 440 mm
Turning radius, braked declared9.6 ft · 2.94 m
Fuel tank declared83.5 qt · 79.0 L95.1 qt · 90 L+14% 934

AGCO-ALLIS 6680 sources

Source
  • Source: Traktorenlexikon, “AGCO-Allis 6680”
  • Source: Traktorenlexikon, “AGCO-Allis 5680”

URSUS 934 sources

Source
  • Source: Wikipedia (pl): Ursus 934 (open data)
  • Source: Traktorenlexikon, “Ursus 934”